Inventory

My component inventory available for use in projects and research.

Inventory

Available

  • X001G4SXY5 DZS Elec 12V 4ch relay board
  • Waveshare 2.13inch e-Paper HAT 250x122 SPI
  • MZDPI-VGA-ZERO 2.8" touch screen for Pi Zero 640x480
    • http://www.raspberrypiwiki.com/index.php/2.8_inch_Touch_Screen_for_Pi_zero
  • 18650 charger+protection module 5V 1A (qty 5)
  • 12V to 5V 3A 15W DC-DC buck converter waterproof
  • 18650 holder 2S 8V 6" wire leads
  • 18650 holder 1S 3.7V 6" wire leads
  • Mini360 buck converter 4.75-23V In 1-17V Out 1.8A (qty 2)
  • Autek 12V to 5V 3A 15W DC-DC buck converter USB port
  • APINEE 10A MPPT 12V/24V Solar Charge Controller
  • digital rotary encoder, 24 steps/rotation (qty 2)
  • 16CH Analog/Digital Multiplexer CD74HC4067 TE669
  • FTDI USB to TTL serial adapter FT232RL (qty 4)
  • TODO: USB serial adapter (qty 2)
  • Suptronics X400 TI PCM5122 DAC amplifier HAT
  • Acrobotic 0.96" yellow-blue I2C 128x64 OLED display module
  • Adafruit 16x2 LCD + 5 button keybad
  • DHT11 temperature+humidity sensor (qty 4)
  • BME280 I2C/SPI temperature/humidity/pressure sensor
  • MPU2950 nine-axis sensor module
  • Adafruit FONA 808 mini cellular GSM+GPS module

Reserved

asdf

In-use

  • Raspberry Pi 2B
    • Raspberry Pi SenseHAT
    • Bambook case
  • NodeMCU devkit v1.1 ESP8266 ESP-12E
    • SunFounder 2ch 5VDC relay module
    • DHT11 temperature/humidity sensor
    • Uxcell a14121000ux0124 water level float switch, 250 mm

Awaiting receipt

  • Generic 68000 / 68008 IC Kit (68000, 68008, 68901, 68230, 68681, MC68B50, AM9511)
  • HM6264ALP-10 8K x 8 CMOS SRAM (qty 2)
  • Generic Z80 chip set (Z80 CPU, CTC, SIO, PIO, Intel 8255 PIO, 8251 SIO, 32K SRAM, 32K EPROM)
  • XC68HCP11AOP 8-bit microprocessor
  • PyBoard v1.1
  • large order:
    • JXT-XH 2-4pin M/F housing connectors w/terminals (2/3/4 pin x20/ea)
    • TTP229 16-Channel Digital Capacitive Switch Touch Module
    • TM1638 display+input module, 8 buttons, 8 LEDs, requires 3 IO ports (qty 2)
    • Lithium BMS 2S 5A
    • 3.3V 5V MB102 Solderless Breadboard Power Supply Module (qty 2)
    • proto board 50x70mm 0.1", 24x18 = 432 holes (qty 10)
    • current sensor module ACS712 Hall test 30A range (qty 2)
    • PCB screw terminals (30x 2 pin, 20x 3 pin)
    • 2ch relay module 30VDC 250VAC 10A w/5V interface, 15-20mA driver, optocoupler (qty 2)
    • I2C display module 128x32 0.91" white OLED SSD1306
    • I2C display module 128x64 OLED SSD1306

Previous Post Next Post